This guide will tell you how to BOOST FPS and Increase Performance in Call Of Duty Warzone 2 & DMZ. First, you have to make sure that your Windows is fully up to date and then make some basic changes in the Windows game section. You also need to make a few changes in the GPU settings, and the Windows graphic settings. After that, set the Windows power plan to the ultimate level and ISLC also needs to be fixed. Then finally you have to make changes in the game graphics settings to achieve the best FPS and ultimate performance.
Windows Update/Settings
First of all, you must ensure that your Window is fully up to date. It is a very important step, as it will give you a phenomenal increase in your game performance.
1.1- For this, you first need to go to the bottom left side of your screen to the search button, write “update” in it and click on “Check for update.” A new window will pop up, you have to navigate down, and click “check for updates”. It will scan your machine to see if there are any updates available.
1.2- Search game mode in the search bar and press enter. Make sure that the game mode is activated. By this, you will get decent performance, you have to make sure that all your resources are focused on the game that you are playing.
1.3- After that, go to the Xbox game bar under Gaming and you have to deactivate this one as it is causing stuttering and crashing in some games.
1.4- After this, click on the Captures tab and make sure that the background recording and also the recorded audio both should be turned OFF.
1.5- Make sure that the auto-upgraded GPU setting is turned on. For this, you have to search graphic settings, you will need an NVidia card of the 1000 series. It will really help with bottlenecks and you can expect a 2 to 5 percent boost in the FPS.
Updating GPU Drivers
You will need to update your GPU drivers or any other outdated drivers. There are two ways to do this.
2.1- Check for updates in the GPU control panel.
If your GPU is running on an older version, then you will not be able to boost your FPS. So do check for updates.
2.2- Download from the GPU manufactures website.
You can also Download the GPU software to update it from the following link. https://coderbag.com/product/quickcpu
Power Plan Settings
This is a great and easy way to enhance the performance of your system, as they are highly customizable and effective for disabling some sleep and low-power modes.
3.1- You must write “edit power plan” in the search column and press enter. Now inside this menu, go to the power option which you will find on top, click on show additional plans and scroll down to select the high-performance power plan.
3.2- After that, go to the bottom left-handed side of your screen to the search bar and run the Command prompt as an administrator. You have to paste this command “powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61”, then press enter, and exit.
Now again go to the power play menu and press the refresh button on the top right corner. Then you will find the ultimate performance power plan, you have to select this option.
ISLC Set Up
You have to download this by clicking on the following link https://www.wagnardsoft.com/forums/viewtopic.php?p=3241#p3241 After that, navigate to the ISIC folder that you saved earlier and run it as an administrator. You need to set the least size to at least 1024 and free memory lower than half of your Ram. Set the custom timer resolution to 0.50 and the ISIC polling rate to 1000. Then click on Start and close it once it completes.
In-Game Settings
5.1- For this first, you have to boot up the game, then go to options, and click on the game settings. After that, navigate under the Display settings and make sure that your display adapters are set according to the Graphics card you are using on your PC. Also, you have to ensure that the display mode is set to full-screen Exclusive and make sure that your resolution is set according to your monitor’s native resolution. Screen refresh rate also completely depends on your monitor. You can set this between 165 to 170. You have to make sure that the Dynamic resolution is turned OFF. You have to set the aspect ratio to automatic and then make sure that the V-Sync is turned off as it will decrease your FPS.
5.2- Now you have to expand the Custom frame rate limit and set the game’s custom frame rate limit to less than 170. After that, scroll down and make sure that the High dynamic range (HDR) is turned OFF as it will enhance your display and give you better performance and FPS.
5.3- After this, go to the Quality tab from the top and set the rendering resolution to 100. You have to make sure that the upscaling/sharpening is turned OFF and set the anti-aliasing SMAA T2X. You have to set the anti-aliasing quality to low. Then set the video memory scale to 85 and set the texture resolution and texture filtering anisotropic to high. You need to set the nearby level of detail and the distant level of details to low.
You have to set the clutter draw distance to short and then set the practice quality and practice level quality to low. After that, turn ON the bullet impacts and sprays and set the shader quality to high. Tesselation should be set to near. You have to set the streaming quality to medium and set the volumetric quality to low.
You have to make sure that the deferred physics quality is turned OFF as it will give you a nice FPS boost. After this, move under the shadow and lighting, and make sure that the shadow map resolution is set to very low. You have to set the spot cache to medium. Particle lighting should be set to low. You need to make sure that the ambient occlusion and the screen space reflection are turned OFF. Also, you have to make sure that the NVidia reflex low latency is turned ON. You have to turn OFf the depth of field and then you have to set the film grain to zero.
