How to Build A Trap In Lumber Tycoon 2

In this brief guide, you will get to know how to make a trap in Lumber Tycoon 2.

You need some stuff before building a trap, so move towards the store to buy different required items.

Buy a chop saw for 12200 coins, a wire for 206 coins, and a pressure plate for 640 coins.

After buying, you have to unbox all these things one by one and start building the trap.

First, you need to place two smooth walls over the blueprints.

Burn out a tree at this point and get smooth wood blocks from there.

Now place the chop saw with this wall at a certain height so that it can easily cut down the players whenever they get stuck into this trap.

You need to make sure to use blueprints to analyze the building before actually placing the stuff there. Now use a pressure plate at the side of the wall.

Then place a wall at the edge of this pressure plate carefully as it may be hard to place on the edge.

Now you need to bring a hatch to place it over this thin wall.

After that, you will need to connect the wires.

Now make another smooth wall on the third side.

And you are almost done with the trap as you can see when we go over the pressure plate the chopper moves to cut us down all of a sudden.

Now just add smooth walls all around this chopper, as you do not want people to see inside the trap of course. You can fill blueprints with little wood blocks.

For these wood blocks, you can simply cut down trees and put the branches of it into the burner machine to get smooth blocks of wood.

Now use tiles to cover the upper part of this little trap room. Use wood blocks again to fill up the blueprints of the roof.

You need many of these wood blocks and have to cut more trees for that and it may take time but it is worth it.

After that, let’s decorate a little. Use tile posts and wood blocks for this purpose.

Now cover the left side of the room with another layer of the wall at the edge of the entrance point and write something here on the top wall with cables. And draw an arrow here as well.

Wait for a prey to come and go over the pressure plate to see him cut down.

Leave a Reply

Your email address will not be published.