This guide will let you know how to Depressurize in Hard Space Ship Breaker. Go through the guide and follow all the steps carefully to Depressurize.
The first thing you will need to do is to make sure whether your ship is pressured or not. You can also use your basic scanner by pressing the default button. The green boxes indicate the pressurized area. So if the ship is pressurized, you can also enter via another ship’s airlock; you have to open and close the door by pressing the default button.
When you are inside, you need to locate the atmospheric thruster and then deactivate it by pressing the E button. Also, you will need to make sure that the doors are open so that all areas get pressurized in the ship. In a few situations, you might have a pressurized ship that doesn’t have atmospheric pressure, so you need to do a controlled depressurization.
If there are moving parts, the ship will explode, so you have to remove parts inside the ship, and you can use the airlock to remove the used parts. You can remove the loose parts by moving them with your set key, which uses your hand, and also, you can use the grappler tool. After that, you have to put a hole in the cockpit and open the ship, which will help to depressurize the ship.