Settings for Naraka Bladepoint, Increase FPS

In this guide, you will find out will tell you, how to BOOST FPS and increase Performance in Naraka Bladepoint. First, you have to make sure that your Windows is fully up to date and then make some basic changes in the Windows game section. Also, you need to make a few changes to the GPU settings, and the Windows graphic settings. You have to set the windows power plan to the ultimate level and ISLC also needs to be fixed. Finally, you have to make changes in the game graphic settings to achieve the best FPS and ultimate performance.

Table of Contents

    Windows Update/Settings

    First of all, you must ensure that your window is fully up to date. It is a very important step, as it will give you a phenomenal increase in your game performance.

    1.1- For this, you first need to go to the bottom left side of your screen to the search button and write “update” on it and then click on check for update. A new window will pop up, navigate down, and click “check for updates”. It will scan your machine to see if there are any updates available.

    1.2- Search game mode in the search bar and press enter. Make sure that the game mode is activated. By this, you will get decent performance, you have to make sure that all your resources are focused on the game that you are playing.

    1.3- After that, go to the Xbox game bar under Gaming and you have to deactivate this one as it is causing stuttering and crashing in some games.

    1.4- After this, you have to click on the captures tab here you have to make sure that the background recording and also the recorded audio both should be turned OFF.

    1.5- Make sure that the auto-upgraded GPU setting is turned on. For this, you have to search graphic settings, you will need an NVidia card of 1000 series. It will really help with bottlenecks you can expect a 2 to 5 percent boost in the FPS.

    Updating GPU Drivers

    You will need to update your GPU drivers or any other outdated drivers. There are two ways to do this.

    2.1- Check for updates in the GPU control panel.

    If in case if your GPU is running on an older version, then you will not be able to boost your FPS. So do check for updates

    2.2- Download from the GPU manufactures website.

    You can also Download the GPU software to update it from the link below.

    Power Plan Settings

    This is a great and easy way to enhance the performance of your system, as they are highly customizable and effective for disabling some sleep and low-power modes.

    3.1- You must write edit power plan in the search column and press enter. Now inside this menu go to the power option which you will find on top, click on show additional plans and scroll down to select the high-performance power plan.

    After this go to the bottom left-handed side of your screen to the search bar and write Command prompt and right click on it and run this as an administrator. Now here you have to paste this command: powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61 after this then press enter and now you can exit.

    Now again go to the power play menu and press the refresh button on the top right corner. then you will see the ultimate performance power plan select this option.

    ISLC Set Up

    You have to download this by clicking on the link:… after downloading save it. Now navigate to the ISIC folder that you saved earlier and run it as an administrator. You need to set the least size to at least 1024 and free memory lower than half of your Ram. Set the custom timer resolution to 0.50 and the ISIC polling rate to 1000. Then click on Start and close it once it completes.

    In-Game Settings

    You will need to boot up the game, then go to settings and click on the Graphics settings. Set the Graphic API to DirectX11 and the Render Scale to 100. Resolution should be set to your monitor’s native resolution and the Display mode should be set to full-screen. The Max frame rate should be set to 170 and the filter should be set to default. HDR display and V-sync both should be turned OFF.

    After that, turn off the Anti-aliasing algorithm, motion blur, NVidia DLSS, NVidia Graphics enhancement, NVidia reflex, and NVidia Highlights.

    Under Graphics, set Quick to Custom and set Modeling accuracy to medium. Tesselation should be set to high and Effects should be set to low. Set Textures to High and Shadows to lowest. Volumetric Lightening should be set to low. Volumetric clouds and ambient occlusion both should be turned OFF.

    Turn off Screen space reflection. Then set Anti-aliasing to low and Post-processing to lowest.

    Leave a Reply

    Your email address will not be published.