Settings for Evil Dead, Increase FPS

This guide will tell you how to BOOST FPS and Increase Performance in Evil Dead. First, you have to make sure that your Windows is fully up to date and then make some basic changes in the windows game section. Then also you have to make a few changes in the GPU settings, and the Windows graphic settings. You have to set the windows power plan to the ultimate level and ISLC also needs to be fixed. Then Finally you have to make changes in the game graphic settings to achieve the best FPS and ultimate performance.

Table of Contents

    Windows Update/Settings

    First of all, you must ensure that your Window is fully up to date. It is a very important step, as it will give you a phenomenal increase in your game performance.

    1.1- For this, you first need to go to the bottom left side of your screen to the search button, type “update” in it, and then click on “Check for update”. A new window will pop up, navigate down, and click “check for updates”. It will scan your machine to see if there are any updates available.

    1.2- Search game mode in the search bar and press enter. Make sure that the game mode is activated so that you will get decent performance. You also need to make sure that all your resources are focused on the game that you are playing.

    1.3- After that, go to the Xbox game bar under Gaming and deactivate this one as it is causing stuttering and crashing in some games.

    1.4- After this, navigate to the Captures tab and make sure that the Background recording and the recorded audio are turned OFF.

    1.5- Make sure that the auto-upgraded GPU setting is turned on. You will need an NVidia card of the 1000 series. It will really help with bottlenecks and you can expect a 2 to 5 percent boost in the FPS.

    Updating GPU Drivers

    You will need to update your GPU drivers or any other outdated drivers. There are two ways to do this.

    2.1- Check for updates in the GPU control panel.

    If your GPU is running on an older version, then you will not be able to boost your FPS. So do check for updates.

    2.2- Download from the GPU manufactures website.

    You can also download the GPU software to update it from the following link. https://coderbag.com/product/quickcpu

    Power Plan Settings

    It is a great and easy way to enhance the performance of your system, as they are highly customizable and effective for disabling some sleep and low-power modes.

    3.1- You must write “edit power plan” in the search column and press enter. Now inside this menu, you need to go to the power option on the top and click on show additional plans. Scroll down to select the high-performance power plan.

    After this, go to the bottom left-handed side of your screen to the search bar and run the Command prompt as an administrator. You have to paste the command “powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61”, then press enter and exit.

    Now again go to the power play menu and press the refresh button on the top right corner. then you will see the ultimate performance power plan select this option.

    ISLC Set Up

    You have to download this from the link https://www.wagnardsoft.com/forums/vi… and then save it. Now navigate to the ISIC folder that you saved earlier and run it as an administrator. You need to set the least size to at least 1024 and free memory lower than half of your Ram. Set the custom timer resolution to 0.50 and the ISIC polling rate to 1000. Then click on Start and close it once it completes.

    In-Game Settings

    You have to boot up the game then go to settings and then click on the video. Gama should be set to normal and make sure that contrast is set to 0. Set the Screen resolution according to your monitor’s native resolution and Windows Mode to exclusive full-screen. After that, set the resolution scale according to your PC specs, if you have a high-end PC, you can set this to the extreme. Or if you have a low to medium-end PC, then you need to set it to low or medium. The view distance should be set to high. Post-processing should be set to low. Shadows should be set to medium. Set textures to Epic. Make sure that effects are set to low.

    Now scroll down and set shading to high. Make sure that v-sync is turned OFF as this will give you an epic boost in FPS and it will help you in increasing your performance. Tesselation should be turned On.

    Config File

    You have to go to your C drive, then go to user and navigate to app data. Go to local then, go to evil dead, navigate to saved and then click on config. In the config folder, you have to open the game user settings and make sure that you are running on the proper resolution. Also, you have to make sure that the HDR display is set to False. then you have to come down to resolution quality you have to set this to 100.

    After this, you have to go to the properties of this file. For this, right-click on the file, and then click on properties and you have to make sure that read-only is check-marked. By doing this no one will be able to change settings.

    Leave a Reply

    Your email address will not be published.