In this guide, you will find out how to BOOST FPS and Increase Performance in Hunt Showdown. First, you have to make sure that your Windows is fully up to date and then make some basic changes in the Windows game section. Then make a few changes in the GPU settings, and you also have to make changes in the Windows graphic settings. You have to set the windows power plan to the ultimate level and ISLC also needs to be fixed. Then make changes in the game graphic settings to achieve the best FPS and ultimate performance.
First of all, you have to make sure that your Windows is fully up to date. It is a very important step, as it will give you a phenomenal increase in your game performance.
1.1- You first need to go to the bottom left side of your screen to the search button, and input “update”. it and click on “Check for update”. A new window will pop up, you need to navigate down and click on “check for updates”. It will scan your machine if there are any updates available.
1.2- Search “game mode” in the search bar, press enter, and make sure that the game mode is activated. By this, you will get decent performance, you have to make sure that all your resources are focused on the game that you are playing.
1.3- After that, go to the Xbox game bar under Gaming and you have to deactivate this one as it is causing stuttering and crashing in some games.
1.4- After that, click on the Captures tab and make sure that the background recording and recorded audio are turned OFF.
1.5- Make sure that the auto-upgraded GPU setting is turned on. You will need an NVidia card of the 1000 series. It will really help with bottlenecks and you can expect a 2 to 5 percent boost in the FPS.
Updating GPU Drivers
You will need to update your GPU drivers or any other outdated drivers. There are two ways to do it.
2.1- Check for updates in the GPU control panel.
If your GPU is running on an older version, then you will not be able to boost your FPS. So do check for updates
2.2- Download from the GPU manufactures website.
You can also Download the GPU software to update it from the link below. https://coderbag.com/product/quickcpu
Power Plan Settings
It is a great and easy way to enhance the performance of your system, as they are highly customizable and effective for disabling some sleep and low-power modes.
3.1- You must write “edit power plan” in the search column and press enter. Inside this menu, you need to go to the power option on the top, click on “Show additional plans”, and scroll down to select the high-performance power plan.
After this, go to the bottom left-handed side of your screen to the search bar and write Command prompt. Right-click on it and run it as an administrator. Then you have to paste the command “powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61”, then press the enter button and exit.
Now again go to the power play menu and press the refresh button on the top right corner. You will find the ultimate performance power plan, you have to select this option.
ISLC Set Up
You have to download it from the following link https://www.wagnardsoft.com/forums/vi… Then save it, navigate to the ISIC folder that you saved earlier and run it as an administrator. You need to set the least size to at least 1024 and free memory lower than half of your Ram. Set the custom timer resolution to 0.50 and the ISIC polling rate to 1000. Then click on Start and close it once it completes.
For this, you have to boot up the game, then go to settings and click on the Graphics tab. Set the Resolution to your monitor’s native resolution and the Display mode to full-screen. The render resolution scale should be set to 100 and Vram should be set to 80%.
After that, set the Global Graphic quality to Custom and Object quality and texture quality to high. Texture quality should be set to 16x(anisotropic). Then turn off Anti-aliasing and set the Lighting quality and Shadow quality to Low. Turn off Effect quality and post-process quality both should be turned OFF. Particle quality should be set to Low. Performance stats should be set to warning. Make sure that the v-sync should be turned OFF. Set max FPS to 180. depth of field and motion blur both should be unchecked.
After this, come down to the advanced setting make sure that use 2 pass scene rendering and use 2 pass lightening only these two options should be checked-marked. After doing all these settings click on apply.