Best Settings for Super People, Increase FPS

In this guide, you will find out how to BOOST FPS and Increase Performance on Super People. First, you have to make sure that your Windows is fully up to date and then make some basic changes in the Windows game section. You also have to make a few changes in the GPU settings, and then make some changes in the Windows graphic settings. You have to set the Windows power plan to the ultimate level and ISLC also needs to be fixed. Then finally you have to make changes in the game graphics settings to achieve the best FPS and ultimate performance.

Windows Update/Settings

First of all, you must ensure that your Window is fully up to date. It is a very important step, as it will give you a phenomenal increase in your game performance.

1.1- For this, you first need to go to the bottom left side of your screen to the search button and write “update” in it and then click on “Check for updates”. A new window will pop up, navigate down, and click “check for updates”. It will scan your machine to see if there are any updates available.

1.2- Search game mode in the search bar, press enter, and make sure that the game mode is activated. By this, you will get decent performance, you have to make sure that all your resources are focused on the game that you are playing.

1.3- After that, go to the Xbox game bar under Gaming and deactivate this one as it is causing stuttering and crashing in some games.

1.4- Now you have to click on the Captures tab and make sure that the Background Recording and the Recorded Audio are turned OFF.

1.5- Make sure that the auto-upgraded GPU setting is turned on. For this, you have to search graphic settings, and you will need an NVidia card of the 1000 series. It will really help with bottlenecks and you can expect a 2 to 5 percent boost in the FPS.

Updating GPU Drivers

You will need to update your GPU drivers or any other outdated drivers. There are two ways to do it.

2.1- Check for updates in the GPU control panel.

If your GPU is running on an older version, then you will not be able to boost your FPS. So do check for updates.

2.2- Download from the GPU manufactures website.

You can also Download the GPU software to update it from the link below.

Power Plan Settings

This is a great and easy way to enhance the performance of your system, as they are highly customizable and effective for disabling some sleep and low-power modes.

3.1- You must write “edit power plan” in the search column and press enter. Inside this menu, you have to go to the power option which you will find on top, click on show additional plans and scroll down to select the high-performance power plan.

3.2- After this, go to the bottom left-handed side of your screen to the search bar and run the Command prompt as an administrator. After that, paste the command “powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61”, then press enter and exit.

Now again go to the power play menu and press the Refresh button on the top right corner. You will find the ultimate performance power plan, you have to select this option.


You have to download this from… and then save it. Now navigate to the ISIC folder that you saved earlier and run it as an administrator. You need to set the least size to at least 1024 and free memory lower than half of your Ram. Set the custom timer resolution to 0.50 and the ISIC polling rate to 1000. Then click on Start and close it once it completes.

In-Game Settings

5.1- You have to boot up the game, then go to options and click on the game settings. After that, go to the Display Settings and make sure that your resolution is set according to your monitor’s native resolution. Also, ensure that the display mode is set to full screen, and the temporal Upsampling, Intel XeSS, NVidia DLSS, and Frame generation all should be disabled. Super-resolution should be set to auto. Sharpen should be set to 0.0. NVidia reflex and V-sync both should be disabled. You can set the brightness according to your personal choice.

5.2- The sharpening should be set to 2.0 and the maximum frame rate limit should be set to unlimited. You have to set the Limit lobby frame rate to 60 FPS.

5.3- After this, go to advanced settings and set the FPS Mode FOV to 100. Overall graphics quality should be set to custom and Shadows should be set to very low. You can set the view distance according to your choice. You can set this too high, low, or medium. Foliage and effects both should be set to very low. The shader quality should be set to High. Anti-aliasing and post-processing both should be set to very low. You have to make sure that the depth of field is disabled.

The advanced global illumination should be disabled. The rendering style should be set to cozy. The DirectX version should be set to DirectX 12. After applying all these settings you have to click on apply.