Flashing lights are craft able blocks in the Minecraft craft. You can make it using quartz blocks, red stone dust and red stone torch. In this guide, you will learn the method to design Flashing Lights.
The first thing you’d need to do is to make an “E” shape with an extra bar using the smooth quartz blocks on the ground. And then add red stone repeaters at the end of every bar of this “E” like structure.
Place red stone torches in between the bars, on the sides next to the red stone repeaters. And use red stone dust in between the red stone repeaters.
The next thing you need to do is to place 8 smooth quartz blocks in a straight line in front of the repeaters. Add red stone dust at the top of the “E”.
Place eight red stone lamps on the right side of blocks and place a red stone repeater on the back side of the “E”. Make a red stone clock by placing the red stone repeater on the ground in the shape of “+” while skipping the middle block.
And then use red stone dust around this clock and set the repeaters to three tick delay. Use red stone dust to connect the clock with a repeater near “E”.
Place a lever near the clock and pull it to start the flashing light. And then use smooth quartz blocks on the sides and top of redstone lamps.
