In this guide, you will find out how to get Call of Duty-like aim in Battlefield 2042 when you’re playing on a controller. You have to apply the following settings to get it.
You will need to press the Options button, go down to settings, and navigate to the Controller tab. It is recommended to set the Soldier Aim sensitivity to 50, then scroll down to Field Of View and set it to 92. Set the Soldier Aim Assist to 80 and the Snap Zoom Aim Assist to 40. Scroll down to Soldier Zoom Sensitivity and set it to 100.
After that, scroll down to the Advanced section and put your Aiming Left/ Right Acceleration to zero, Vertical Aim Ratio, and Vertical Zoom Ratio to 100. Turn off Uniform Soldier Aiming and reduce the zoom sensitivities based on how you want to go ahead.
Go to vehicles and do the same thing under there. After that, tab over to Controller Tuning and turn off the Controller Vibration. For the controller left stick, set the Center Dead Zone and Axial Dead Zone down to zero and set Max Input Threshold to 100. For the right stick, if you are getting a ladder draft, you can keep increasing it until you don’t have any stick drip. Set the Max Input Threshold to 100. Next, you need to set the L2 Deadzone, L2 Max Input Threshold to 100, and R2 Deadzone to zero. Set the R2 Max Input Threshold to zero.
