A classic grand strategy war game, Imperator: Rome has been ruling the hearts for over a decade now. But to be honest, certain elements of the game could use a lift up. Well, in comes the game console. With the game console, you can completely revamp your gameplay. From endless customizations to additional features, the options are endless. You can destroy mercenaries, start civil war, spawn items and much more. 

How to Enable Game Console? 

In order to access these functions, you need to enable the game console which is disable by default. You need to launch the game in debug mode in order to enable it. To enable debug mode, 

Launch Steam, go to the game and right click it, select properties 

Not click Set Launch options and add “-debug_mode” 

You are now going to have to create a shortcut for the game. Select the game file, right click it, select properties and in the target field, add “-debug_mode” in the end after a space 

One Caveat is that the debug mode disables achievements and Console commands are not available in ironman games or in multiplayer mode. 

Now launch the game through the new shortcut and press ` or ~ key right below the Esc key to open the console. If that doesn’t work, or you have a non-Us keyboard layout, you can try any of the following:  

  • Shift+2, 
  • Shift+3, 
  • ALT+2+1, 
  • §, 
  • ^, 
  • °, 
  • ² 

Once opened, type in the command and press ENTER to send it.

Imperator: Rome Cheats

NameSyntaxDescription
3dstats3dstats3dstats is a toggle console command which is used to display or hide the Information regarding FPS.
aeae [amount]You can increases the expansions of your country by using this cheat code. You have to specify the amount in the syntax.
aiai [country tag]The ai command helps you to switch on or off the Artificial intelligence in the game.
aistatsaistatsThe aistats command is used to log AI statistics to the ai.log file.
aiviewaiviewThis command is used to enable or disable the AI view.
amnesiaamnesia [country tag]The amnesia console command helps you to find out the tag of a country.
annexannex [country tag]This console command annexes the specific country to yours/
armyarmy [amount] [province id]You can adds any amount of units in selected province. You have to specify the province and amount in the syntax.
army_loyaltyarmy_loyalty [province id] [loyalty amount]This console command is used to set the army loyalty of a particular province to the specified amount.
cashcash [amount]The cash commnand is used to add or remove the amount of cash or gold within the game.
centralizationcentralization [percentage]You can set the centralization to your desired amount by giving the percentage in the syntax.
civil_warcivil_war [country tag]You can start a civil war with any country using this command. You have to specify the country tag in command syntax.
clearclearThe clear console command is used to clean up the console by deleting all messages.
clear_aistatsclear_aistatsThis command will cleaar all Ai statistics.
coat_of_armscoat_of_arms [country tag]This console command will print the script for the country's coat of arms/flag to games.log.
compoundnodeeditorcompoundnodeeditorThe compoundnodeeditor command is used to open the Compound Node Editor/Node Graph tool.
conquerconquer [province id]You can conquer any particular province with the help of this command. You have to specify the province id in syntax.
controlcontrol [province id / country tag]The control command provides you the of a specified province.
crashcrashThis console command will result in crashing the client.
debug_modedebug_modeThis is a toggle mode. When the debig mode in on, it shows the information about provinces.
declare_wardeclare_war [country tag] [country tag]You can start a war between two particular countries by running this console command. You have to specify both countries tag in the syntax.
delay_diplodelay_diploThis command will enable or disable the delay response of the Ai.
destroy_mercenariesdestroy_mercenariesIf you want to tae down all the mercenaries in the game in a very quick instant, then you can use this command.
dumpdatatypesdumpdatatypesThe dumpdatatypes command helps you to dump all the data types.
eagernesseagerness [country tag]The eagerness console command is used to check the eagerness of Ai for the war.
enable_dev_cheatsenable_dev_cheatsThe enable_dev_cheats console cammnad will enable the dev cheats.
errorerrorThis command is used to check if there is any error in the console. If there is, the command will not generate any output.
eventevent [event id] [country tag / province id / character id]The event console command will kick start the event for character, province or country, you specified in the syntax.
event_queueevent_queueThis command is used to print game.log file data related to the game's event queue.
executeexecute [country tag]You can kill the units of a particular country using this console command. You have to specify the country tag in syntax.
exileexileThe exile command is used to exile the selected unit.
explorerexplorerThis console command will open the object explorer debug tool
forcepeaceforcepeace [country tag]You can use force pace command to prevent the war with any particular country.
tweak fowtweak fowThis is a toggle command that is used to turn on or off the Fog Of War.
gameloggamelogThe gamelog command is used to print the game log to the console.
halthaltThis command will enable the halt mode and the unit will be enter to the safer land
healthy_economyhealthy_economyThe healthy_economy command will print the list of the countires in the game who have a healthy economy.
helphelp [command]This console command is used to print the list of aal command or any particular command. You can specify the command in syntax.
helphelphelphelpThis command will return a joke message. It has nothing to do with the game context.
helploghelplogThis console command is used to print all the commands in game log file.
hordehorde [province id]The horde command will increases or decreases number of Barbarians in selected province.
instant_warinstant_warThis is a toggle command that is used to enable or disable the war declaration.
kickkick [player name]You can use kick command to kick any particular player out of the game.
killkill [character id]The kill console command will kill any particular players with a blink of eye.
legitimacylegitimacy [amount]The legitimacy command is used to change the monarch’s legitimacy level.
loadload [file name]You can load the saved file using this command. You must specfy the file name in the syntax.
loading_screenloading_screenThe loading_screen is a toggle command, When it is enabled it will enable indefinite loading screens.
make_childmake_child [character id] [character id]This command will declare two charatcer as a mother and the other father. And give them a baby child.
manpowermanpower [amount]The manpower console command is used to Increase/decrease number of manpower working.
map_editormap_editorThis console command is used to open up the Map Editor tool.
mapmodemapmode [map mode id]You can change the display mode of the map using this console command. You have to specify your desired map id.
marrymarry [character id] [character id]The marry console command will arrange a marriage between two particular characters.
minidumpminidump [file name]You can use this command to save the minidump to any particular file by giving the file name in syntax.
monthsmonths [country tag] [country tag]This command would tell you how long it will take, in months, for a particular country to be able to challenge your country in war.
mpstatsmpstatsThe mpstats console command will save the multiplayer statistics to the game.log file
music.nextmusic.nextYou can change the music.next command to change the current music track.
music.togglepausemusic.togglepauseThe music.togglepause command is used to pause or unpause the game's music.
navynavy [amount] [province id]The navy command helps you to summon ships for a particular province. You can specify the amount and province id in the syntax.
nomennomenThe nomen command will make the AI countries decline all offers made to them. If this is already enabled, you can disable it by running the same command.
observeobserveThe observe command is used to switch to the spectator mode.
oos_dumpoos_dumpThe oos_dump command when executed, results in creating a oos dump.
output_terrainoutput_terrainThe output_terrain console command is ued to save the province terrain data file to documents.
particleeditorparticleeditorIf you want to open the Particle Editor tool, then you use this command.
piratespirates [province id]You can summon a pirates group for a particular province using this console command.
planactionplanaction [index]The planaction console command is used to look up the planned action. You can specify the index number in the syntax.
playersplayersIf you want to print the list of players that are currently connected to the game server, players command is perfect for this purpose.
portrait_editorportrait_editorThe portrait_editor console commad helps you to open or close the portrait editor.
powerpower [amount]The power command is used to increase Civic, Oratory, Religious, and military power of your nation. You can specify the desired amount of power.
ppappa [country tag]This command forces the AI of a particular to update its parallel plan actions. You can specify the country in syntax.
preferprefer [country tag]This command forces the AI of a particular to update its preffered units. You can specify the country in syntax.
print_randomlogprint_randomlogThe print_randomlog console command is used to print the random log.
printmapprintmap [map mode] [file name]You can save a picture of your game's map with the help of this command. You can specify the map mode and file name to save the picture.
refresh_mercenariesrefresh_mercenariesThis command is used to refresh the mercenaries. They will be will destroy and rebuild.
release_moderelease_modeThis is a toggle command and it is used to enable or disable the release mode.
reloadreload [file name]If you want to reload any particular file, then you can use this console command.
rendertyperendertypeThis console command is ued to find out what rendering system your client is using.
replanreplan [country tag]The replan command would force any particular country which is being controlled by Ai, to replan.
replayreplayThis command is used to enable the replay tool of the game. If it is alreadsy enables then you can disable it running the same command again.
revoltrevolt [country tag]The revolt console command is used to start a revolt in the country. You have to specify the country's tag.
savesave [file name]You can save your game to a particular file by specifying the file name.
screenshotscreenshotIf you want to take a screenshot of your game at any point, then you can use this command.
script_docsscript_docsThe script_docs console command will print the script documentation to the console.
select_provinceselect_province [province id]You can select any particular province with the help of this command. Must specify the province id in the syntax.
set_ageset_age [character] [age]If you want to set the age of any particular character, this command is best for this purpose. Specift the charatcer name and age in th esyntax.
settingssettingsThe settings console command helps you to open the debug settings.
setup_editorsetup_editorThis console command will let you open the province setup editor where you can edit culture, religion, etc.
shader_debugshader_debugThe shader_debug console command is used to remove all the shader debugging.
spawnentityspawnentity [entity id] [state id]This console command is used to spawn the particular entity under your cursor.
stabstab [amount]The stab command is used to change the stability.
state_loyaltystate_loyalty [province id] [amount]You can change the loyalty level of a state by executing state_loyalty command.
statisticsstatisticsThe statistics console command helps you to display the statistics to the game's game.log file.
switchlanguageswitchlanguage [language name]You can change the language of the game with this command. You have to specify your desired language name.
tt [country name]The t command let you play as any particular country be specifying the country name in syntax.
tagtag [country tag]You can replace your playing country with another one by executing this command.
techtech [amount]You can add or remove the amount of technology with the tech command. Specify the amount in th syntax.
test_savetest_saveIf you want to start a save test, then you can use this console command.
testchartestcharThis command is used to give the character all data.
teststatusteststatusYou can print the status of concluded tests using this cosole command. Just type teststatus in the syntax.
textureviewertextureviewerIf you want to open the Texture Viewer graphic user interface, then this is the best command to do so.
ticktickThis consoel command helps you to tick all the units that you have currently selected.
tick_daytick_day [amount]The tick_day command advances time by the specified number of days.
timetimeYou can print the current game time by executing the time command.
timingtiming [off / show / log / all]The timing console command helps you to alter the game time. You can choose your time mode.
tweaktweak [tweaker gui name]This command is used to opens the tweaker GUI to enable or disable Fog of War.
tyrannytyranny [amount]The tyranny console command is used to change the tyranny level. Can be changed to number of your choice.
unrestunrest [province id] [amount]This command is used to change the amount of unrest in a province.
updateupdateThis console command is used to daily update the selected units. But not very sure about the outcome of this command.
versionversionYou can print the console information of your current game with the help of version command.
vsyncvsyncThis is a toggle command which is used to enable of disable the sync graphics setting.
warexhaustionwarexhaustion [amount]The warexhaustion console command is used to modifies your war exhaustion. You can specify the amount to add or remove the warexhaustion.
watchwatchThis command is used to enable or disable the watch windows. If already enabled, you can disable it using the same command.
winterwinterYou can update the winter for all provinces using this console command.
yesmenyesmenThe yesmen console command is used to activates yesmen.
0 Shares:
Leave a Reply

Your email address will not be published.